APIIT NATAsia Pacific Institute of Information Technology National Admission Test
- Test Level-: National Level
- Eligibility-: 12th
- Duration-:2 Hours 30 Minutes
- Stream-: Engineering
- Medium-: English
- Examination Mode-: Online
- Total Questions-: 100
Result : Click Here
APIIT Conduct National Admission Test for B.Tech admission programme.
APIIT NAT 2017 Courses Offered
- B.Tech in Computer Science and Engineering
- B.Tech in Electrical and Electronics
- B.Tech in Mechatronics
- B.Tech in Electronics
APIIT NAT 2017 Eligibility Criteria
Educational Qualifications
- Candidate must passed 10+2 from any recognized board and with these two compulsory subject i.e. Physics and Mathematics and having one of these subjects Chemistry/Computer
- Candidate have at least 45% marks in total in 10+2 class or its equivalent and 40% marks for the reserved category candidates.
Age Limit
The minimum age for applying the APIIT NAT is 17 years and the maximum age is 20 years.And if the candidate does not match will the age limit then the candidate is not eligible for applying the APIIT National Admission Test.
Paper pattern:
The test will consist of 100 multiple choice questions (50 Mathematics and 50 Physics). The duration of the paper will be two hours and 30 minutes. The candidates must note that each correct answer will carry 3 marks and 1 mark would be deducted for an incorrect answer.
Important Dates :
- Starting Date of Application Form : 15th October 2016
- Last Date of Submission of Application Form : 01 May 2017
- National Admission Test (NAT) Date : 7 May 2017
- Result will be declare on : 14 May 2017
National Admission Test Instructions:
Cost of Application Form/Brochure is Rs. 700/-. The payment is to be made in the form of a Demand Draft in favour of "APIIT SD INDIA", payble at Panipat and send the same at APIIT SD India, Faridpur Road, GT Road, Karnal Side, Near Toll Plaza, Panipat- 132103 (Haryana).
OR
In case of downloaded application form:
http://nat.apiit.edu.in/downloads/ApplicationForm2016.pdf
A Demand Draft for 700/- in favour of "APIIT SD INDIA", payble at Panipat is required to be attached with the filled in application form and has to be sent at APIIT SD India, Faridpur Road, GT Road, Karnal Side, Near Toll Plaza, Panipat- 132103 (Haryana).
- Three self attested passport size photographs, 1 should be pasted on the application form & 1 each on Attestation Form A and Form B.
- The Acknowledgement Card (Form C) will be sent back to the candidate within a week of receiving the application form.
- Attestation Form B which will act as an Admit Card/Hall-Ticket for the candidate, will be sent to the candidate by post 15 days before the test.
- The candidate is required to produce the Admit card in the examination hall to the Center Superintendent, for verification.
- The application number mentioned on the Application Form would act as the Examination Roll No. for the candidate.
- Before filling the application form read all the booklets. Application Form should be completely filled by the candidate and duly signed by the candidate and Father/Guardian.
- Choice of Test center and details of payments should be carefully filled.
PHYSICS |
||
1 | Units And Measurement | Units for measurement, system of units S.I., fundamental and derived units. Dimensions and their applications. |
2 | Description of Motion in One Dimension | Motion in a straight Line, uniform and non-uniform motion, their graphical representation Uniformly accelerated motion, and its applications |
3 | Description Of Motion In Two Dimensions | Scalars and vectors, Uniform circular motion and its applications, Projectile motion. |
4 | Laws Of Motion | Force and inertia- Newton's Laws of Motion. Conservation of linear momentum and its applications, rocket propulsion, friction laws of friction |
5 | Work, Energy And Power | Concept of work, energy and power. Energy Kinetic and potential. Conservation of energy and its applications, Elastic collisions in one and two dimensions. Different forms of energy. |
6 | Rotational Motion And Moment Of Inertia | Centre of mass of a two-particle system. Centre of mass of a rigid body, general motion of a rigid body, nature of rotational motion, torque, angular momentum, its conservation and applications. Moment of inertia, parallel and perpendicular axes theorem, expression of moment of inertia for ring, disc and sphere. |
7 | Gravitation | Acceleration due to gravity, one and two-dimensional motion under gravity. Universal law of gravitation, variation in the acceleration due to gravity of the earth. Planetary motion, Kepler's laws, artificial satellite geostationary satellite, gravitational potential energy near the surface of earth, gravitational potential and escape velocity. |
8 | Oscillations & Waves | Periodic motion, simple harmonic motion and its equation of motion, energy in S.H.M. Oscillations of a spring and simple pendulum. Wave motion, speed of a wave, longitudinal and transverse waves, superposition of waves, progressive and Standing waves, free and forced Oscillations, resonance, vibration of strings and air-columns, beats, Doppler effect. |
9 | Heat And Thermodynamics | Thermal expansion of solids, liquids and gases and their specific heats, Relationship between Cp and Cv for gases, first Law of thermodynamics, thermodynamic processes. Second law of thermodynamics, Carnot cycle, efficiency of heat engines. Modes of transference of heat. Thermal conductivity. Black body radiations, Kirchoff s Law, Wien's Law, Stefan's law of radiation and Newton's law of cooling. |
10 | Electrostatics | Electric charge its unit and conservation. Coulomb's law, dielectric constant, electric field, lines of force, field due to dipole and its behaviour in a uniform electric field, electric flux, Gauss's theorem and its applications. Electric Potential, potential due to a point charge. Conductors and insulators, distribution of charge on conductors. Capacitance, parallel plate capacitor, combination of capacitors, energy of capacitor. |
11 | Current Electricity | Electric current and its unit, sources of energy, cells- primary and secondary, grouping of cells resistance of different materials, temperature dependence, specific resistivity Ohm's law, Kirchoff s law, series and parallel circuits. Wheatstone Bridge with their applications and potentiometer with their applications. |
12 | Magnetic Effects Of Currents | Oersted's experiment, Bio-Savert's law, magnetic field due to straight wire, circular loop and solenoid, force on a moving charge in a uniform magnetic field (Lorentz force), forces and torques on currents in a magnetic field, force between two current carrying wires, moving coil galvanometer and conversion to ammeter and voltmeter. |
13 | Electromagnetic Induction And Alternating Currents | Induced e.m.f., Faraday's Law, Lenz's Law, Self and Mutual inductance, alternating currents, impedance and reactance, power in a.c. Circuits with L.c. And R series Combination, resonant circuits. Transformer and A.C generator. |
14 | Ray Optics | Reflection and refraction of light at plane and curved surfaces, total internal reflection, optical fibre; deviation and dispersion of light by a prsim; Lens formula, magnification and resolving power; microscope and telescope. |
15 | Wave Optics | Wave nature of light; Interference Young's double slit experiment. Diffraction diffraction due to a single slit. Elementary idea of polarization. |
16 | Solids And Semi-Conductors Devices | Energy bands in a solids, conductors, insulators and semi-conductors, n junction, diodes, diode as rectifier, transistor action, transistor as an amplifier. |
MATHEMATICS |
||
1 | Complex Numbers | Complex numbers in the form a + ib and their representation in a plane Argand diagram. Algebra of complex numbers, Modulus and Argument (or amplitude) of a complex number, square root of a complex numbers. Cube roots of unity, triangle inequality. |
2 | Matrices And Determinants | Determinants and matrices of order two and three, properties of determinants. Evaluation of determinants. Area of triangles using determinants. Addition and multiplication of matrices, adjoint and inverse of matrix. Test of consistency and solution of simultaneous linear equations using determinants and matrices. |
3 | Quadratic Equations | Quadratic equations in real and complex number system and their solutions. Relation between roots and coefficients, nature of roots, formation of quadratic equations with given roots; Symmetric functions of roots, equations reducible to quadratic equations-application to practical problems. |
4 | Permutations And Combinations | Fundamental principle of counting; Permutation as an arrangement and combination as selection, Meaning of P (n, r) and C (n, r). Simple applications. |
5 | Binomial Theorem And Its Applications | Binomial Theorem for a positive integral index; general term and middle term: Binomial Theorem foranyindex. Properties of Binomial coefficient. Simple applications for approximations. |
6 | Sequences And Series | Arithmetic, Geometric and Harmonic progressions. Insertion of Arithmetic Geometric and Harmonic means between two given numbers. Relation between A.M., G.M. and H.M. Special series: ?n, ?n2, ?n3. Arithmetico - Geometric Series, Exponential and Logarithmic series. |
7 | Differential Calculus | Polynomials, rational, trigonometric, logarithmic and exponential functions. Inverse functions. Graphs of simple functions. Limits, Continuity; differentiation of the sum, difference, product and quotient of two functions, differentiation of trigonometric, inverse trigonometric logarithmic, exponential, composite and implicit functions; derivatives of order upto two. Applications of derivatives: Rate of change of quantities, monotonic increasing and decreasing functions. Maxima and minima offunctions of one variable, tangents and normals, Rolle's and Lagrange's Mean Value Theorems. |
8 | Integral Calculus | Integral as an anti-derivative. Fundamental integrals involving algebraic, trigonometric, exponential and logarithmic functions. Integration by substitution, by parts and by partial fractions. Integration using trigonometric identities. Integral as limit of a sum. Properties of definite integrals. Evaluation of definite integrals; Determining areas of the regions bounded by simple curves. |
9 | Differential Equations | Ordinary differential equations, their order and degree. Formation of differential equations solution of differential equations by the method of separation of variables. Solution of homogeneous and linear differential equations and those of the type d^y dx3=f(x) |
10 | Two Dimensional Geometry | Recall of Cartesian system of rectangular co-ordinates in a plane, distance formula, area of a triangle, condition for the collinearity of three points and section formula, centroid and in-centre of a triangle, locus and its equation translation of axes, slope of a line, paralleland perpendicular lines, intercepts of a line of the coordinate axes. |
The straight line and pair of straight lines Various forms of equations of a line, intersection of lines, angles between two lines, conditions for concurrence of three lines, distance of a point from a line. Equations of intemaland external bisectors of angles between two lines, coordinates of centroid, orthocentre and circumcentre of a triangle, equation of family of lines passing through the point of intersection of two tines, homogeneous equation of second degree in x and y, angle between pair of lines through the origin, combined equation of the bisectors of the angles between a pair of lines, condition forthe general second degree equation to represent a pair of lines, point of intersection and angle between two lines. |
||
Circles and Family of Circles Standard form of equation of a circle, generalform of the equation of a circle, its radius and centre, equation of a circle in the parametric form, equation of a circle when the end points of a diameter are given, points of intersection of a line and a circle with the centre at the origin and condition for a line to be tangent to the circle length 0' .he tangent, equation of the tangent, equation of a family of circles through the intersection of two circles, condition for two intersecting circles to be orthogonal.. |
||
Conic Sections Sections of cones, equations of conic sections (parabola, ellipse and hyperbola) in standard forms, condition for y = mx + c to be a tangent and point (s) of tangency. |
||
11 | Three Dimensional Geometry | Coordinates of a point in space, distance between two points; Section formula, direction ratios and direction cosines, angle between two intersecting lines. Skew lines, the shortest distance between them and its equation. Equations of a tine and a plane in different forms intersection of a line and a plane, coplanar lines, equation of a sphere, its centre and radius. Diameter form of the equation of a sphere. |
12 | Vector Algebra | Vectors and scalars, addition of vectors, components of a vector in two dimensions and three dimensional space, scalar and vector products. Scalar and vector triple product. Application of vectors to plane geometry. |
13 | Probability | Probability of an event, addition and multiplication theorems of probability and their applications: Conditional probability; Bayes'Theorem, Probability distribution of a random variate; Binomial and Poisson distributions and Their properties. |
14 | Trigonometry | Trigonometrical identities and equations, Inverse trigonometric functions and their properties. Properties of triangles, including centroid, incentre circum-centre and ortho-centre, solution of triangles. Heights and Distances. |
15 | Numerical Methods | Iterative methods of solving equations: False position, Newton Raphson, Numerical Integration Rule: Trapizoidal and Simpsons Rule. |
BIOLOGY |
||
CLASS-XI |
||
1 | Diversity in Living World | Biodiversity; Need for classification; Three domains of life; Five kingdom classification; Salient features and classification of plants into major groups-Algae, Bryophytes, Pteridophytes, Gymnosperms and Angiosperms; Salient features and classification of animals-nonchordate up to phyla level and chordate up to classes level. |
2 | Structural Organisation in Animals and Plants | Morphology and modifications; Tissues; Anatomy and functions of different parts of flowering plants; Animal tissues; Morphology, anatomy and functions of different systems. |
3 | Cell Structure and Function | Cell theory and cell as the basic unit of life; Structure of prokaryotic and eukaryotic cell; Plant cell and animal cell; Cell envelope, cell membrane, cell wall; Cell organelles-structure and function; Endomembrane system-endoplasmic reticulum; Chemical constituents of living cells; B Cell division. |
4 | Plant Physiology | Transport in plants: Movement of water, gases and nutrients; Mineral nutrition: Essential minerals, macro and micronutrients and their role; Photosynthesis: Photosynthesis as a means of Autotrophic nutrition; Respiration: Exchange gases; Cellular respiration; Plant growth and development: Seed germination; Phases of Plant growth and plant growth rate. |
5 | Human Physiology | Digestion and absorption; Alimentary canal and digestive glands; Role of digestive enzymes and gastrointestinal hormones; Nutritional and digestive disorders; Breathing and Respiration: Respiratory organs in animals (recall only); Respiratory system in humans, Occupational respiratory disorders; Body fluids and circulation: Composition of blood, blood groups, coagulation of blood; Composition of lymph and its function; Human circulatory system-Structure of human heart and blood vessels; Excretory products and their elimination: Modes of excretion- Ammonotelism, ureotelism, uricotelism; Human excretory system-structure and fuction; Urine formation, Osmoregulation; Locomotion and Movement: Types of movement- ciliary, fiagellar, muscular; Skeletal muscle- contractile proteins and muscle contraction; Skeletal system and its functions Disorders of muscular and skeletal system; Neural control and coordination: Neuron and nerves; Nervous system in humans; Chemical coordination and regulation: Endocrine glands and hormones; Human endocrine system-Hypothalamus, Pituitary, Pineal, Thyroid, Parathyroid, Adrenal, Pancreas, Gonads; Mechanism of hormone action and related disorders. |
Class-XII |
||
1 | Reproduction | Reproduction in organisms: Reproduction, a characteristic feature of all organisms for continuation of species; Modes of reproduction in plants; Sexual reproduction in flowering plants: Development of endosperm and embryo, Development of seed and formation of fruit; Special modes-apomixis, parthenocarpy, polyembryony; Human Reproduction: Male and female reproductive systems; Reproductive health: Need for reproductive health and prevention of sexually transmitted diseases (STD); Birth control; Amniocentesis; Infertility and assisted reproductive technologies. |
2 | Genetics & Evolution | Heredity and variation: Mendelian Inheritance; Deviations from Mendelism-Incomplete dominance, Co-dominance, Multiple alleles and Inheritance of blood groups, Pleiotropy; Elementary idea of polygenic inheritance; Chromosomal disorders in humans; Down’s syndrome, Turner’s and Klinefelter’s syndromes. Molecular basis of Inheritance: Structure of DNA and RNA; DNA packaging; DNA replication; Central dogma; Transcription, genetic code, translation; Gene expression and regulation-Lac Operon. Evolution: Origin of life; Biological evolution and evidences for biological evolution from Paleontology, Gene flow and genetic drift; Hardy-Weinberg’s principle; Adaptive Radiation; Human evolution. |
3 | Biology & Human Welfare | Health and Disease; Pathogens; parasites causing human diseases. Improvement in food production; Plant breeding, tissue culture, single cell protein, Biofortification; Apiculture and Animal husbandry. Microbes in human welfare: as biocontrol agents and biofertilizers. |
4 | Biotechnology & its Applications | Principles and process of Biotechnology: Genetic engineering. Application of Biotechnology in health and agriculture. |
5 | Ecology & Environment | Organisms and environment: Habitat and niche; Population and ecological adaptations. Ecosystem: Patterns, components; productivity and decomposition; Ecological Services-Carbon fixation, pollination, oxygen release. Biodiversity and its conservation: Red Data Book, biosphere reserves, National parks and sanctuaries. Environmental issues: Air pollution and its control; Water pollution and its control; Ozone depletion; Deforestation. |